The best way to Glue Wood into a Refrigerator
Some types of home design depend on on wood to get a glow that is warm even. All the tough, shiny steel surfaces including refrigerators, ranges and dishwashers are included to the woodworking. They coated with slender panels or are either totally included in cupboards. Asis frequently, only the facet facing the living area coated using a slim panel using that is, the entrance of the refrigerator remaining Asis. This provides the appearance the refrigerator is made to the cabinets. You accomplish this result and can glue a panel to the aspect of any fridge.
Buy or and buy and measure a 1/4 inch hardwood plywood panel that matches width and the peak of the medial side of the fridge. Sand, stain and lacquer it as required.
Slide the fridge out of the wall at least a way and one foot from any cupboards at least one foot. You don’t have to to unplug it. If it’s not going to stretch that far, just slide it out without unplugging it as far as you can.
Lay the wood-panel face-down across two saw-horses. Run beads of construction adhesive 2″ apart, parallel down the amount of the panel with each other. The beads should operate together with the grain of the wood.
Place the 2 4-inch- long 2 by-3/4 inch stick beneath the aspect of the fridge where you want to place the panel, immediately on the ground. The stick needs to be parallel to the medial side of the fridge.
Stand the panel on the stick. Square the panel using the sides of the ice box. Gently drive ahead the panel s O the glue makes con-Tact with all the refrigerator.
Push and sleek the panel down with both of your hands fingers onto along side it of the ice box. Continue sleek and to drive the panel down as you grip the panel tighter and sense the adhesive flatten somewhat.
Stretch 3inch strips of masking tape on the other side of the panel and also the ice box, perpendicular to the panel, 12″ apart round the perimeter of the ice box, take on the underside. It is alright to stretch the tape within the facet of the door. Wait 2 4 hours before removing the stick as well as the tape.