The way to Remove Rust on Vinyl Tile
Although vinyl itself does not rust, if tough water evaporates off your vinyl tile flooring, it also may leave a red-brown rust stain. Rust dissolves as it comes into contact with acid, however some acids may dissolve the coatings on the vinyl tiles too. Abrasives, solvents, bleaches and ammonia can all harm vinyl flooring, therefore select a mild cleaning agent rather. If you have very tough rust stains that won’t respond to gentle cleaners, oxalic acid can eliminate the rust without damaging the vinyl — but it is toxic to you, so handle it carefully.
Cream of Tartar Method
Mix small quantities of water to cream of tartar till it forms a paste. Scoop the paste onto a cloth.
Rub the paste onto the rust stains on the tile. Allow it to sit for several minutes.
Wipe the glue off the tile using a clean cloth. If the rust does not come off, repeat the procedure and leave the glue on the tile for an extra five minutes. If it still does not work, move on to a stronger acid.
Oxalic Acid Method
Wear safety glasses, gloves and long sleeves to protect yourself from the acid. If you’re using powdered oxalic acid rather than a 5-percent liquid solution, mix 10 teaspoons of the powder to 1 quart of water to generate a 5-percent solution.
Dip a cloth into the answer. Rub the rust stain on the vinyl. Allow it to sit for five minutes. Rub the spot again to see if the rust comes away.
Lay the wet cloth over the spot if the rust has not dissolved. Allow the acid work for 10 minutes. If the rust still won’t come away, wet the cloth and lay it above the spot for the next 10 minutes.
Spray the ground with an alkaline cleaner or sprinkle baking soda over the spot to neutralize the acidity. Scrub the floor with a cloth to remove the rust as well as the cleaners. Wash the floor with a sponge soaked in water, and then dry it using a clean cloth.