How to Cut Landscape Timbers to Form a Circle

Landscape timbers are implemented in retaining walls and as measures, borders and other characteristics throughout lawns for your rustic texture they bring to a site and their comparatively low price and ease of installation. Where you want to produce a curved retaining wall or edging or build a raised bed using a nearly circular shape, you will need to cut the ends of the timbers at non-90 degree angles to create the desired kind. With a miter box and saw will allow you to make very precise cuts, but various power saws also supply feasible cutting options. Furthermore, the cut ends of timbers are left vulnerable to decay and weathering, requiring treatment prior to installation.

Draw out or otherwise intend the design to your landscape timbers. Determine how large you want the circle to be, the size to each timber, how many timbers you will use and the angle the timber finishes must have. If you will use a miter box to guide your cuts, be sure that your intended angles for the timber finishes are angle options offered on the miter box.

Measure the planned timber length on a landscape wood and mark the position and line of the angled cut, employing a woodworking protractor or angle-finder as a guide. Merely prepare and saw one timber at one time, because you will use the cut edge of one as a guide for another timber.

Place the timber end in an appropriately big miter box, then aligning the intended cut line on the timber using the corresponding guide on the miter box. If the box has a clamp of any kind, use the clamp to secure the timber. Landscape timbers tend to be heavy enough that they move small during cutting, however, clamping them in position or having another person hold the timber stable is good practice.

Cut the wood along the intended line, utilizing the saw that accompanies the miter box or a different saw that is suitable for the miter box. Otherwise, you can carefully cut along the line with a handsaw, circular saw or chainsaw while a person holds the timber steady.

Use the trim end of the timber or the eliminated portion of timber as a guide to your cut on the next timber to make sure that they’ll fit together. Duplicate the cutting and rebooting process for the remaining timbers. After cutting each timber, check the cut edges together with the protractor or angle-finder to be sure they have the desired angle. Make adjustments or re-cut the timbers as required.

Brush a wood wax or wax meant for outdoor use on the recently cut ends of every part of landscape wood, applied according to sealer manufacturer directions.

See related