The best way to Paint Foam Composite Trim

As you remodel the the outside of your house to include vinyl siding or one of the maintenance- sidings on the marketplace, you need to include trim which is maintenance-free. Products are available in light-weight foam formulas made from polypropylene, polyurethane, polystyrene and polyvinyl chloride. The bulk of them are available in white while these trims come in many different profiles. In the event that you would like another color trim, it’s required for that you paint this foam composite trim. By painting the trim that is composite, it is possible to enhance the look of your house also as add to its worth.

A rag soaked in mineral spirits or alcohol over the period of the completed side of the foam trim. Allow the alcohol time to dry. It won’t consider extended. This action eliminates any solvent-based chemicals that create a waxy-like movie that stays on the trim in the manufacturing process.

Mix several drops of dish detergent in a gallon bucket of water that is warm. Wipe this combination over the the top of foam composite trim to complete washing-off grime or any chemicals that stays on the area. Rinse with clear water. Let the air that is trim dry.

Sand the area of the foam trim with 220-grit sandpaper. You don’t need to sand the part of the trim that you aren’t painting. This increases the paint’s capacity to to stick to to the foam.

Wipe sandpaper grit and dirt in the trim’s surface using a tack cloth.

A coat of mildew-resistant primer to the uncovered sides of the trim. Allow the primer to dry. Drying times vary as a result of humidity and temperature.

Foam composite trim with two coats of exterior latex paint. Allow the first coat to dry before including the 2nd one.

See related